1
View Application Guide →Find the Right Doming Machine for Your Label Production
Compare semi-auto PJ180, desktop or floor-standing 3-axis, and CCD vision-guided resin doming machines by product layout, production volume, positioning risk and upgrade path.
Quick Selector
Start From Your Production Situation
Use product layout, repeatability, changeover work, required production volume and resin conditions as the first filter. Final selection should still be confirmed with sample testing.
Samples / small batches
Start with a PJ180 semi-auto doming machine when product types change often, sample testing matters and the required production volume is low.
Why it fits: Lower investment and flexible for product testing, resin validation and changing order types.
Watch out: Output and consistency depend more on operator skill, loading speed and process discipline.
Recommended: Semi-autoRegular sheet production
For growing repeat orders, compare desktop or DJ771 3-axis platforms by sheet size, floor space and budget. Check both programmed dispensing and manual loading when estimating output.
Why it fits: Saved paths, stable fixtures and repeat sheet layouts improve repeat production.
Watch out: Confirm sheet size, spacing, fixture design and resin viscosity before choosing the platform size.
Recommended: desktop / floor-standing 3-axisPositioning variation or frequent changeovers
Compare CCD vision when placement or print position varies beyond what fixtures or regular layouts can control, or when frequent irregular-label changes make visual path setup more practical.
Why it fits: Camera correction can reduce off-centre dispensing caused by position changes.
Watch out: CCD is not automatically faster for simple regular sheets; sample testing should confirm the benefit.
Recommended: CCD visionUnsure about resin or dome height
Send samples first to assess whether resin preparation, mixing, degassing, fixtures and curing are causing bubbles, uneven domes or edge-control issues; a higher machine level does not correct those process conditions.
Why it fits: Sample results show whether the proposed resin and setup fit the finished product.
Watch out: Do not choose by machine model alone when resin or the use environment is still unknown.
Recommended: Sample testCompare Robota Resin Doming Machines
These three machine levels cover most label, decal, nameplate, badge and keychain doming workflows.
Entry / Low Volume
PJ180 Semi-Auto Doming Machine
Best for: samples, small batches and changing product types.
- Hands-on path control
- Manual loading
- Metering and dynamic mixing
Repeat Sheet Production
DJ771 3-Axis Automatic Doming Machine
Best for: regular sheet layouts, stable product sizes and repeat orders; choose desktop or floor-standing platform by sheet size.
- Saved 3-axis paths
- Stable fixture-based repeats
- Metering and dynamic mixing
Positioning / Changeovers
SJ4060 CCD Vision-Guided Doming Machine
Best for: placement variation that needs camera alignment, or frequent irregular-label changeovers that benefit from visual path programming.
- Camera alignment
- Visual path programming
- Metering and dynamic mixing
Applications
Match the Machine to Your Domed Product
Start from product type when machine choice is still unclear, then use the detail page to confirm resin, layout and sample testing needs.
2
View Application Guide →Domed Nameplates
3
View Application Guide →Domed Industrial Labels
4
View Application Guide →Automotive Emblems
5
View Application Guide →Domed Badges
6
View Application Guide →Domed Keychains
7
View Application Guide →Domed Promotional Products
Machine + Resin
Machine Choice Should Include Resin and Consumables
Stable doming production depends on machine level, resin selection, mixing control, fixture design, curing and after-sales support.
Doming Resin Selection
- Epoxy resin for many clear indoor labels, decals and rigid products
- Polyurethane resin for outdoor, flexible or high-contact products
- Sample testing confirms adhesion, bubbles, edge control and dome height
Accessories & Consumables
- Dynamic mixers, nozzles, tubes and dispensing needles
- Vacuum degassing, tank heating and hose heating when needed
- Fixture and process support for repeat production
Send Your Sample Details Before Choosing a Machine
Share your product size, material, sheet layout and target dome height. Robota will check whether semi-auto, 3-axis or CCD vision setup is more suitable.
Product photos or drawings
Resin or material requirements
Target volume and dome height
Appointment Demo Time
FAQ About Choosing a Doming Machine
Which doming machine should I choose first?
Use the production-situation selector to compare PJ180, 3-axis and CCD routes, then send sample details to confirm the proposed setup.
Is a 3-axis automatic machine suitable for irregular or mixed layouts?
Yes, if each sheet can be positioned repeatably: saved 3-axis paths can handle complex outlines, holes and mixed shapes. Compare CCD when placement or print position varies beyond fixture control.
Should I choose epoxy resin or polyurethane resin?
Epoxy is a practical starting point for many indoor products; clarity and hardness depend on the formulation. Test a suitable polyurethane formulation when flexibility, impact or outdoor exposure matters. Curvature alone does not decide the resin. Confirm the choice with the actual printed product and cure conditions.
Can one machine handle decals, nameplates, badges and keychains?
Yes, if the dispensing path, fixture, resin and dome height are adjusted correctly. The machine level depends on product layout, positioning accuracy, order volume and material behavior.