Samples and material changes
Semi-Auto Doming Machine
Manual path control for samples, material changes and small label batches.
Domed Industrial Labels Production & Resin Doming Machine Solutions
Produce durable resin domed industrial labels for equipment ID, product labels, control panels and machinery branding. Match the machine by material, sheet layout, volume, positioning accuracy and use environment before purchase.
Best for
Equipment labels, product ID labels, warning labels, control panel labels, machinery tags, PC/PET labels, metal labels and durable brand labels.
Machine selection
Semi-auto, 3-axis automatic or CCD vision system matched by layout, volume and positioning accuracy
Recommended resin
Epoxy or polyurethane resin matched to substrate, hardness, flexibility, UV exposure and working environment
What Are Domed Industrial Labels?
Domed industrial labels are printed, metal or film labels coated with a clear epoxy or polyurethane resin layer to create a raised 3D surface. The resin improves gloss, protects printed information and gives equipment labels, product ID labels and control panels a more durable finished appearance.
Raised resin layer improves equipment identification, warning visibility and brand recognition
Protects model numbers, warning text, QR codes and serial information from handling wear
Readability, surface coating and use environment should be tested before machine selection
Why Use Resin Doming for Industrial Labels?
Raised resin finishing helps industrial labels stay readable, protected and traceable on equipment, panels and outdoor products.
Readable Equipment ID
Protects model numbers, warning icons, QR codes and serial labels while keeping identification clear.
Print & Coating Protection
Helps protect ink, film laminate and metal label surfaces from handling wear and light chemical contact.
Panel & Machinery Fit
Works for equipment ID labels, control panel labels and machinery tags after surface and adhesion testing.
Environment-Matched Resin
Choose epoxy or PU based on UV, cleaning agents, abrasion, chemical contact and label flexibility.
Production Requirements for Domed Industrial Labels
Key parameters to confirm before starting resin domed industrial label production.
| Requirement | Options / Range | Notes |
|---|---|---|
|
Label Material
|
PC, PET, PVC, aluminum, stainless steel, acrylic, ABS or coated films | Surface should be clean, dry and tested for resin adhesion before production. |
|
Surface Finish
|
Printed, coated, brushed metal, film-laminated, laser marked or textured | Ink, coating and surface texture may affect adhesion, clarity and final appearance. |
|
Shape / Layout
|
Regular sheets, strips, holes, cutouts, mixed labels or free placement | Confirm the outline, holes or cutouts and whether each label can be loaded repeatably before choosing the fixture and path. |
|
Production Volume
|
Samples, small batches, repeat orders or high-volume sheets | For output planning, stable warning or equipment-label sheets can suit 3-axis automation, but outdoor or chemical-exposure labels should confirm resin behavior before estimating usable output. |
|
Resin Type
|
Epoxy resin or polyurethane resin | Choose by hardness, flexibility, UV exposure, chemical contact and use environment. |
|
Dome Height
|
Usually 0.5 mm – 4 mm, adjusted by label size and edge design | Higher domes require stable edge control and the right resin viscosity. |
|
Use Environment
|
Indoor equipment, appliances, outdoor machinery, tools or branded products | For outdoor, flexible or frequently handled labels, test a suitable resin formulation on the complete printed label for the expected exposure and use. |
Industrial Label Production Checks
Check the final label before choosing resin, fixture and dispensing path. Keep small text, warning content and QR codes readable; test the printed or coated surface and the expected oil, cleaner, UV or temperature contact.
Readability and Dome Control
Small warning text, icons or QR codes can become harder to read if the dome is too high or uneven.
Solution:
Test dome height, resin volume and optical clarity on real printed labels.
Narrow Edges and Overflow
Small text labels, strips and narrow edge designs can overflow or connect if resin volume or viscosity is wrong.
Solution:
Adjust resin volume, viscosity, path offset and edge distance on final label sheets before production.
Fixture Repeatability and Finished Height
Thin films, flexible labels or unstable fixtures can move during loading and dispensing.
Solution:
Use suitable fixtures, Z-height control and sample tests before batch production.
Surface, Print and Coating Adhesion
Dust, coating residue, unsuitable ink or textured surfaces can reduce resin bonding and leave cloudy edges.
Solution:
Clean the surface and test adhesion and clarity on the final material, print, coating and resin system.
Use Environment and Chemical Contact
Equipment labels may face cleaners, oil, moisture, UV or temperature changes; untested exposure can reduce clarity, adhesion or protective value.
Solution:
Choose resin, substrate and sample aging checks based on the working environment.
How to Choose the Right Industrial Label Doming Machine & Resin Setup
No single machine fits every industrial label workflow. Match the setup to your material, surface finish, layout repeatability, order volume, dome height and indoor or outdoor use.
Repeatable sheet layouts
3-Axis Automatic Doming Machine
Saved paths for repeatable loading, including repeatable labels with holes or cutouts.
Placement variation or irregular changeovers
CCD Vision-Guided Doming Machine
Camera correction for measured placement variation; on-screen path editing supports frequent irregular-label changeovers.
Recommended Resin Setup
Soft Epoxy Doming Resin
- Clear, glossy dome finish
- Good for rigid indoor labels and product ID tags
- Best where high UV exposure or flexibility is not required
- 308AB-3S1 reference: initial cure in about 10–12 hours and final cure in about 18 hours at room temperature.
Polyurethane Resin
- Good flexibility and impact resistance
- Better for outdoor, flexible or high-contact labels
- A candidate for exposed machinery labels after chemical, UV and adhesion tests
- 618AB-18 reference: about 24 hours at 25°C, or about 2–4 hours with 60–80°C heat curing.
Resin selection depends on label material, surface finish, required hardness, flexibility, UV resistance, chemical contact and expected working environment.
Domed Industrial Label Machine + Resin Selection Table
Use this table as a starting point. Final machine and resin selection should be confirmed with sample testing.
| Industrial Label Situation | First Decision Trigger | Recommended Setup | Resin Starting Point | Why It Fits |
|---|---|---|---|---|
| Samples / Low Volume | Changing label materials or specifications | PJ180 Semi-Auto | Epoxy or PU after surface testing | Flexible process validation |
| Stable Repeatable Sheets | Repeat positions, stable fixtures and repeat orders; repeatable holes or cutouts can use saved paths | Desktop 3-Axis or DJ771 by sheet size, space and output target | Epoxy or PU by service environment | Saved paths and repeatable production |
| Variable Placement / Frequent Irregular Changeovers | Position varies after sheet and fixture controls are applied, or frequent irregular-design path changes add setup work | SJ4060 CCD Vision-Guided | Epoxy or PU by service environment | Camera correction addresses measured variation; on-screen path tools can simplify irregular-design changeovers |
| Oil / Cleaner / UV Exposure | Defined chemical and environmental contact | Choose machine by layout; test the complete label system | Test resin with final ink, coating and substrate | Service conditions change material validation, not machine positioning |
Sample Testing Workflow (Before You Buy)
Test your real industrial labels first so adhesion, clarity, dome height and machine setup are confirmed before purchase.
1
Send industrial label samples
Provide label samples, drawings, material, print/coating and use environment.
2
Adhesion & resin compatibility test
We test resin clarity, adhesion, curing and surface finish on your samples.
3
Dome height & edge control
We fine-tune resin volume and dispensing path for your target dome height.
4
Video / report + quote
Receive test video, report, and machine + resin recommendation.
What to Provide for a Quote
What To Provide?
- Industrial label samples or drawings
- Label size and thickness
- Label material and surface finish
- Target dome height
- Monthly production volume
- Indoor, outdoor or chemical exposure
- Current labeling or doming process
- Special requirements
Industrial Label Examples
Regular Sheet Labels
Aligned sheets, uniform label shapes
Mixed Labels / Holes / Cutouts
Different label shapes, holes and placements
*Your details will be kept strictly confidential with us.
FAQ About Domed Industrial Label Production
Which resin is better for domed industrial labels: epoxy or polyurethane?
It depends on the label material, use environment and resin formulation. Epoxy is a practical starting point for many indoor labels; hardness and clarity depend on the selected product. Test a suitable polyurethane formulation when flexibility, impact or outdoor exposure matters. Confirm adhesion, readability, edge control and cure on the real printed labels before choosing the resin.
Can resin domed industrial labels be used outdoors?
Yes, after the complete label system has been validated for the intended exposure. Test the final substrate, printed surface and a suitable resin formulation for the expected UV, moisture, temperature and chemical contact. A polyurethane formulation is a candidate to evaluate. Send your material and use conditions so adhesion, readability and dome stability can be checked.
What label materials can be used for resin doming?
Common materials include PC, PET, PVC, acrylic, ABS, aluminum, stainless steel and coated films. The key is surface condition: ink, coating, lamination, brushed metal and oils can affect adhesion, so real-sample testing is important.
Which doming machine should I choose for industrial labels?
Use the selection table above as the starting point. For industrial labels, send the final substrate, print or coating, smallest text or QR code, expected cleaner or oil contact, and fixture details so readability, adhesion and setup can be checked before production.