SJ4060 Operation Tutorials

Watch when starting the SJ4060 setup sequence before creating a vision-based dispensing job.

Use when checking axis movement and venting air from the resin path during initial setup.

Watch when calibrating the A/B resin component delivery before a production program is confirmed.

Use when trapped air is present in the mixing tube and the resin path needs venting.

Watch when reviewing the black suck-back valve response at the dispensing outlet.

Use before setup to orient yourself to the touchscreen controls used in this workflow.

Watch when creating a software template and programming a simple sticker layout.

Watch when transferring a prepared program file from one table to another.

Use when reviewing the relationship between resin discharge speed and nozzle movement speed.

Watch after a run or before material remains in the mixing tube for an extended period.

Use during a production pause to review the mixing-tube anti-curing function.

Review the tank-heating controls when preparing a resin job that uses this function.

Use when checking the low-level alarm settings for the A/B and cleaning tanks.

Use after a nozzle or setup change when nozzle-position accuracy needs calibration.

Watch when vision positioning needs camera-accuracy calibration.

Use when setting the reference-plane orientation for a vision-coordinate workflow.

Watch when calibrating work-plane camera parameters for an advanced layout.

Review the shown system-flush sequence for scheduled cleaning; use the approved cleaning material for your configuration.

For confirmed optional stirring-motor configurations, review the speed adjustment control.